Warning |
---|
This page is IN PROGRESS - Aliena |
Pathway: Operations > Manifest Consolidation
Manifest Consolidation is the process of combining waste material into one manifest for transporting offsitedestruction. This article details the process users should follow to prepare open batches for shipping.
...
Prepare For Shipping
Warning |
---|
Transporter/Destination display on the printed manifest consolidation form - should we add this in somewhere? If there is no transfer (scenario 1) Transporter and Destination are pulled from the route for the form. |
...
No Transfer
In many cases, waste is picked up from the collection site and transported only once to the facility where it is destroyed. The steps below highlight that process.
Select the Source and Destination from the drop downs at the top of the screen. Then select ‘Open’ from the Status filter.
Select Load to display only the batches with an open status.
Right-click on the batch you would like to prepare for shipping and select Edit Batch. The Manifest Consolidation Batch popup editor will display.
Enter a Transporter, Destination and Ship Date into the batch editor. These are required fields to mark the batch as ‘Ready to Ship’.
Verify the location in the Destination field is correct and complete all other fields as needed. Click Save when finished.
After the batch has saved, right-click within the row of the batch and select ‘Mark Ready to Ship.’
Transfer
Click on the Status drop down and select ‘Open’.
Select Load and only batches with an Open status will load.
Right-click on the batch you would like to prepare for shipping and select Edit Batch. The Manifest Consolidation Batch popup editor will display.
Enter a Transporter, Destination and Ship Date into the batch editor. These are required fields to mark batch ‘Ready to Ship’’
Transporter identifies who is taking the waste to the next location. Transporter setup is located in Setup > Operations > Transporter.
Verify the location in the Destination field is correct and complete all other fields as needed. Click Save when finished.
Right-click within the row of the batch and select ‘Mark Ready to Ship.’
...